PURECO Silk finish range is 100% washable, no sealer needed and easy to use.
It is the perfect choice for those who like to paint and go, more suited to smooth clean looks than textured looks.
How to Use
Self sealing, low sheen finish.
Always do a test patch to see if this product is right for your project.
Easy to clean and stain-resistant finish.
Minimal prep is required on your projects. Brush, roller or spray.
Clean substrate, sand flaking paint off, lightly scuff shiny surfaces to promote adhesion.
For best results use a synthetic smooth flat brush in nice even smooth strokes.
Sealing, waxing and top coating are not required.
In some cases, you may find some substrates may have tannin bleed-through. Should this happen, use our base & blocker to prevent further staining.
600ml will cover approx 7-8 square metres in normal conditions. This will definitely depend on the colour choice, whites will require more coats hence cover less square metres.
Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).
Cure time 7 - 14 days. See Note below.
Modern sleek matte to low sheen finish.
Able to be shabbied up as you do with Chalk paints.
Silk Finish range has a built in sealer, sealers can certainly be used on top for extra durability, waxes are made to be absorbed into the paint surface and may just slide around and not absorb into the coating with the Silk Finish range.
Easy clean up with water for brushes, rollers and spray equipment.
Note: Do not apply paint if the air temperature or substrate temperature is below 10 °C or above 35 °C. The temperature should not fall below 10 °C during the drying process as it will effect the adhesion of the Silk Finish and lengthen the curing process.
*Please note: Silk Finish range should be used in conjunction with Base & Blocker as they are produced to work together. We cannot guarantee that when you using other brands of stain blockers, you will achieve optimum coverage or results with Silk Finish range.